In Flight USA Article Categories
In Flight USA Articles
Floatplane Heaven
By David Brown
A Beaver takes off noisily from Lake Union, the pilot having to contend with sailboats and assorted water craft. The paddle steamer beyond the Beaver just adds to the atmosphere. (David Brown)Many years ago, I gained my seaplane ticket at the Salton Sea in California, flying a Piper Cub on floats. In two days, I learned the art of operating from water, coming ashore on beaches and ramps, reading the water, assessing the wind, sailing without the engine, and the ins and outs of operating from rivers and lakes.
Fast forward through a number of years of landplane flying, interspersed with a couple of delightful flights in a Twin Otter on floats out of Ketchikan, landing on Lake Wilson, and a scenic tour of the Great Lakes with Chuck Greenhill in his twin-engine Mallard flying boat from his base at Kenosha.
Recently, I was offered the chance of a right-seat ride in a floatplane Turbo-Otter from Lake Union to Victoria Inner Harbor in British Columbia, Canada.
Contrails: A Hand Me Down Flying School
By Steve Weaver
When I think about the aircraft that populated our flying business in the late ‘60s, I realize what an eclectic mix of airplanes it was. We had two, four, and six place airplanes, very old airplanes, one almost new airplane, and even a twin in the person of an old Aztec. Each had a role in the business, and each one had a distinct personality that I still remember.
At birth, except for colors and optional equipment, airplanes are pretty much identical to the brethren that share the production line. In 1977, while working for Cessna, I parked my new 310 demonstrator on the ramp at Allegheny Airport in Pittsburgh while I went inside to meet with someone. I returned a half hour later just in time to see a gentleman thoroughly pre-flighting my 310. I watched from a distance while he did a textbook preflight inspection. He drained all the sumps and inspected the fuel sample for dirt or water, he checked the oil in both engines, then slowly circled the airplane, poking this and wiggling that.
Falling in love with a Cassutt
Steve Weaver in the early 70s with his speedy Cassutt. (Courtesy of Steve Weaver)By Steve Weaver
In the summer of 1974 I was operating a Flying Service in the northern part of West Virginia. My days were full to overflowing as I jumped between management duties and flying, managing the bustling FBO when I could and flying when I was needed to fill-in for the other pilots.
The charter business was booming at that time and many of my days (and nights) were spent flying businessmen and freight all over the Eastern part of the US in the Navajo, the Seneca and the Aztecs that we operated for hire. During one such trip to a small airport in the Eastern section of Pennsylvania, an ad on the office bulletin board caught my eye.
“For Sale, 1937 J-2 Cub”, the sign said. I owned a 1939 J-3 at the time, but I’d always been curious about the earlier Cubs that used the 40 horse power Continental engines. I inquired about it from the lady running the little airport, and she stated that it had been her deceased husband’s airplane and she wanted to sell it to make room in the hangar.
How Bill Piper and His Piper Cub Taught America How to Fly
By Alan Smith
We all know that a number of men played a significant role in the development of the private aircraft. We know about Clyde Cessna, Walter Beech, Don Luscombe and others, but only one really made a personal plane affordable to the masses. That was William T/ Piper of Bradford, Pennsylvania where he worked in his father’s oil business. He was well into middle age before he found himself moving into the airplane business and did not learn to fly until he was 60 years old.
Early in the century, shortly after the Wright Brothers had proved the powered airplane possible at Kitty Hawk North Carolina on December 17, 1903, Piper had been in the military, had been involved in the Spanish American War, and had earned a Harvard degree in mechanical engineering. He set out to get into the industrial construction business, but soon lost interest in that and returned to Bradford with his family to join his father in the oil business.