In Flight USA Article Categories
In Flight USA Articles
Flying Into Writing: Some Things Have Changed Over the Years…
By Eric McCarthy
Ahh…it seems like only yesterday! My long cross-country as a student pilot…
I was speaking with one of my CAP squadron-mates the other day and asked how close he was to finishing his Private Pilot license. He said he had just a couple of items left, including his solo long cross-country. Since he was training at a Part 141 flight school, his cross-country merely had to cover at least 100nm. As I look at the FARs today, it appears that the requirements may have been relaxed from when I did my long cross-country years ago. As I recall, my flight had to have three legs of at least 100nm each.
At the time I was training at Turners Falls (0B5), a remote, picturesque airport located at a sharp bend in the Connecticut River in north central Massachusetts. The airport has a 3,200-foot runway that sits on a plateau about 50 feet above the river, which to me as a young aviator provided an exhilarating view when approaching runway 16 over the river.
I had planned my flight under the supervision of my instructor and just needed the weather and aircraft availability to cooperate. That day arrived in July, 1980. I had graduated from UMass that May, and had been making the 100 mile trek from my home in eastern Massachusetts to complete my training at 0B5 since then, but that was getting tedious – especially since I lived under the traffic pattern of Norwood Memorial Airport (KOWD). This would end up being my last flight from Turners Falls.
My flight would take me from Turners Falls to Portland International (KPWM); from there to Martha’s Vineyard (KMVY); and then back to Turners Falls; total distance: about 360nm. It would take me almost five hours’ flight time to complete in the club’s Cessna 152, N49394.
What's Up: It’s Pucker Month so? The month of love and Valentines!
By Larry Shapiro
I love each month that has a theme. Some are good, and some aren’t. It seems that most have a food theme, and then I remember I write an aviation column, and I’m suppose to write about things that are suppose to make aviators happy.
It was at that point I remembered that making an aviator happy might be above my pay grade. Then I remembered how much alike we all are… but we are polite except for a few rude ones that sneak in. I know we all appreciate the kindness and help offered to us almost everywhere when we’re trying to survive a cross-country flight.
This reminds me how few pilots ever leave their zip codes or time zones after they are sitting on their private tickets. I’m serious! I have this discussion more often than I do about ice cream. Any new aviator that works with me gets the same suggestion: When you have 100 hours, beg, borrow, or even rent an appropriate airplane, and now the “kicker,” I beg, plead, and whatever it takes to get them to do the following trip, and… to do it solo.
The Hazards of Confirmation Bias in Aviation
By Shanon Kern
A wise pilot once told me, “If you’re planning to fly somewhere, be ready to drive.” At the time, I didn’t fully understand the relevance of this statement. In my inexperienced student pilot mind, I believed that I would be able to plan a vacation, reserve the plane months in advance, and fly to my intended destination. I was unaware that in order for a scenario like this to work out, a lot of external factors would have to fall perfectly in place.
According to the NTSB database, in 2013 there were a total of 49 part 91, aviation related accidents where instrument meteorological conditions (IMC) prevailed. As I searched through the database and read the weather reports, I was left wondering why a pilot would choose to fly in such adverse weather conditions? After reading several factual NTSB reports, a pattern started to develop. The majority of the flights were not VFR flights into IMC conditions. They were cross-country flights where the weather was questionable, at best, from the start.
Wrong Way Corrigan - A Last Bit of Fun Before World War II
By Alan Smith
In October of 1925 when 18-year-old Douglas Corrigan went for a ride in a Curtiss Jenny, he had no idea that in thirteen years he would be both famous and notorious. What the ride did was change his goal in life from being an architect to living in the growing world of aviation. He started taking flying lessons every Sunday and after twenty Sundays he soloed. The government rules and regulations of aviation were still forming and Corrigan soon had a pilot’s license in hand. He also had good mechanical talent gained from a few years in the construction business. When his parents divorced, he had quit school and gone to work to earn money. His father was a construction engineer and Douglas had learned a lot from him.
Claude Ryan and his partner B.F Mahoney were building airplanes as the Ryan Aeronautical Company at the California airfield where Corrigan learned to fly and also had a shop in San Diego. They offered Corrigan a job as a mechanic at their San Diego operation when they decided to shut down their factory near Los Angeles and move south. It was 1927 and Corrigan saw about a half dozen partially built airplanes in Ryan’s San Diego plant. They just sat there because of cancelled orders. Corrigan went to work wondering how long this job would last.
Light Sport Flying With In Flight USA - April 2011
Sport Pilots and Flight Planning
By Ed Downs
Is there something different about a shiny, new Sport Pilot planning a cross country flight and what we might expect to see from a typical pilot coming out of the pre-GPS world that preceded the late 1990s? It is possible that there is, and pre 90s aviators might be able to learn a thing or two.
As spring fights its way into existence to end a long, cold winter, many are planning flying trips to a variety of business or recreational locations. A lot of aircraft owners are beginning to realize that their passion for recreational flying may dribble over into the more mundane transportation needs for which they have used the airlines in the past. Policy and pricing changes within the airline industry have become increasingly customer hostile, service to cities other than major hubs has been further reduced, and the TCA continues to add significant inconveniences to the travel experience. The fact is, point-to-point travel time for most trips of less than 600 miles is significantly less in the typical S-LSA than by modern airliner. The bottom line is that many more folks will turn to their recreational hobby planes for day-to-day travel needs.
Ferrying a Beech Baron to Brazil: Part 1
By Steve Weaver
A couple of years ago I got a call from a gentleman in Brazil, inquiring about a Cessna 210 that I was advertising. Roberto Martins lived near Sao Paulo and was a farmer who worked a 120,000 acre farm, raising cattle and soy beans, and he was also a pilot that needed an airplane to cover the vast distances of his country with it’s scattered population centers.
Over the next few weeks we had several conversations by phone about the 210, and finally a deal was struck for him to purchase the airplane and begin the process of getting the ship ready to export to Brazil.&
A Flight Down Memory Lane
By Steve Weaver
I was thinking during a flight the other day, as I watched the little airplane that represented my position over the planet earth, skimming over the towns, roads and other conveniently-identified objects on the GPS moving map, that navigation isn’t as much fun as it once was. Pilots who have cut their teeth on VOR, Loran and now GPS navigation must find it hard to imagine finding their way across the country with only a map and a watch, and nothing to back up those humble aids. It can be done, and many of us who wouldn’t dream of describing ourselves as “Old Timers” have done it, for hours and hours and miles and miles.
Around the World in a Waco YMF-5D?
By Carl Dye
Chief Pilot and General Manager
Photos Courtesy of
Waco Classic Aircraft Company
Every now and then we get an inquiry from an intrepid aviator contemplating what is possibly the ultimate adventure in an airplane, a flight around the world.
Could it be done in a WACO Classic YMF? Yes, it is possible.